| AASB |
FASTENER LENGTH |
1.390 INCHES MINIMUM AND 1.450 INCHES MAXIMUM |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.189 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
4 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASU |
HEAD HEIGHT |
0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAWK |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER |
0.685 INCHES MINIMUM AND 0.695 INCHES MAXIMUM |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAWL |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER |
0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAWF |
FOURTH DIAMETER FROM HEAD |
0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.645 INCHES MINIMUM AND 0.655 INCHES MAXIMUM |