| AAVW |
WASHER QUANTITY |
1 |
| CTJJ |
PRIMARY WASHER MATERIAL THICKNESS |
0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM |
| CTHW |
PRIMARY WASHER STYLE |
FLAT EXTERNAL TEETH |
| AASK |
HEAD STYLE |
PAN NO. 2 |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AASL |
HEAD DIAMETER |
0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1050 OVERALL OR STEEL OVERALL OR STEEL COMP 1552 OVERALL OR STEEL COMP 1055 OVERALL OR STEEL COMP 1053 OVERALL OR STEEL COMP 1551 OVERALL OR STEEL COMP 1060 OVERALL |
| AASA |
THREAD LENGTH |
0.089 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633-CANCELED FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-633 FS FED SPEC 4TH MATERIAL RESPONSE OVERALL OR QQ-S-633 FS FED SPEC 5TH MATERIAL RESPONSE OVERALL OR QQ-S-633 FS FED SPEC 3RD MATERIAL RESPONSE OVERALL OR QQ-W-409 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-633 FS FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-S-633 FS FED SPEC 6TH MATERIAL RESPONSE OVERALL OR QQ-S-633 FS FED SPEC 7TH MATERIAL RESPONSE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.112 INCHES |
| CSPG |
PRIMARY WASHER OUTSIDE DIAMETER |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,FINISH NO. -262 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| CQBC |
MINIMUM TENSILE STRENGTH |
55000 POUNDS PER SQUARE INCH |
| AASB |
FASTENER LENGTH |
0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
40 |