| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.062 INCHES MINIMUM FIRST HOLE AND 0.063 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| AASL |
HEAD DIAMETER |
0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| AASU |
HEAD HEIGHT |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
2 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.550 INCHES MINIMUM FIRST HOLE AND 0.570 INCHES MAXIMUM FIRST HOLE |
| AAJD |
THREAD CLASS |
2A |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.135 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.594 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |