| AASK |
HEAD STYLE |
PAN NO. 2 |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AASL |
HEAD DIAMETER |
0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 324 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 309S OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 322 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 385 OVERALL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AASB |
FASTENER LENGTH |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| AASA |
THREAD LENGTH |
0.200 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |