| AASA |
THREAD LENGTH |
0.345 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJC |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| CYAU |
SCREW MATERIAL |
STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| AAJD |
THREAD CLASS |
3A |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AASB |
FASTENER LENGTH |
0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| CYBA |
SCREW SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE |
| AASL |
HEAD DIAMETER |
0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |