| CQHQ |
MINIMUM YIELD STRENGTH |
30000 POUNDS PER SQUARE INCH |
| CRHC |
HOLE CONFIGURATION STYLE |
ROUND LONGITUDINAL HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJC |
| ASDB |
WIDTH ACROSS FLATS |
0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| AASA |
THREAD LENGTH |
0.172 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| MATT |
MATERIAL |
STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP XM-7 OVERALL |
| AASU |
HEAD HEIGHT |
0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
80.0 ROCKWELL B MINIMUM OVERALL |
| AAUB |
HOLE DIAMETER |
0.047 INCHES NOMINAL |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| BQDM |
HOLE TYPE |
DRILLED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASL |
HEAD DIAMETER |
0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
6 |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |