| MATT |
MATERIAL |
STEEL COMP 305 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 316 OVERALL |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| AGAV |
END ITEM IDENTIFICATION |
AN/ALR-56C |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
2 |
| AASB |
FASTENER LENGTH |
0.425 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.138 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.100 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AASA |
THREAD LENGTH |
0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |