| AASL |
HEAD DIAMETER |
0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| ANEE |
GRIP LENGTH |
0.250 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM GRIP AND CHROMATE GRIP |
| AAUR |
GRIP DIAMETER |
0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS334 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASA |
THREAD LENGTH |
0.398 INCHES MINIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASB |
FASTENER LENGTH |
0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES GRIP |
| ASDB |
WIDTH ACROSS FLATS |
0.157 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8740 OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES MINIMUM |