| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| MATT |
MATERIAL |
STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4130 OVERALL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES TOP OF HEAD |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND PAINT OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2 CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL AND PS 13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES BEARING SURFACE OF HEAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASA |
THREAD LENGTH |
0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-5400 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
HIGH-TORQUE |
| ANEE |
GRIP LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |