| ZZZK |
SPECIFICATION/STANDARD DATA |
88044-AN525 GOVERNMENT STANDARD |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AASU |
HEAD HEIGHT |
0.082 INCHES MINIMUM AND 0.092 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AASL |
HEAD DIAMETER |
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| AASK |
HEAD STYLE |
ROUND EXTENDED WASHER |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CYAU |
SCREW MATERIAL |
STEEL COMP 4037 OR STEEL COMP 8630 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASB |
FASTENER LENGTH |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| CYBA |
SCREW SURFACE TREATMENT |
CADMIUM AND CHROMATE OR CHROMATE ZINC |
| AATD |
EXTENDED WASHER THICKNESS |
0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM |
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6300,G40370 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050,G86300 MIL SPEC 2ND MATERIAL RESPONSE |
| AATC |
EXTENDED WASHER DIAMETER |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TYPE 2,FE/ZN 13 ASSN STD 2ND TREATMENT RESPONSE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |