| ANEE |
GRIP LENGTH |
0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| AASB |
FASTENER LENGTH |
1.238 INCHES MINIMUM AND 1.285 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
76823-51B334 MANUFACTURERS STANDARD |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES NOMINAL FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.122 INCHES MINIMUM FIRST HOLE AND 1.169 INCHES MAXIMUM FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAUR |
GRIP DIAMETER |
0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.290 INCHES MINIMUM AND 0.357 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASL |
HEAD DIAMETER |
0.451 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| CRSQ |
COUNTERSINK ANGLE |
99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |