| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AASB |
FASTENER LENGTH |
1.156 INCHES NOMINAL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.339 INCHES MINIMUM AND 0.341 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.065 INCHES MINIMUM FIRST HOLE AND 0.072 INCHES MAXIMUM FIRST HOLE |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.094 INCHES NOMINAL FIRST HOLE |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AASU |
HEAD HEIGHT |
0.172 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.339 INCHES MINIMUM AND 0.341 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.100 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.328 INCHES MINIMUM |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.229 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| AAWK |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER |
0.703 INCHES NOMINAL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASL |
HEAD DIAMETER |
0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.600 INCHES NOMINAL |