| CMLP |
THREAD QUANTITY PER INCH |
24 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS517 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| AASA |
THREAD LENGTH |
0.454 INCHES MINIMUM AND 0.529 INCHES MAXIMUM |
| CYAU |
SCREW MATERIAL |
STEEL COMP 8630 OR STEEL |
| AASL |
HEAD DIAMETER |
0.692 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| CYBA |
SCREW SURFACE TREATMENT |
CADMIUM |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| AASB |
FASTENER LENGTH |
0.673 INCHES MINIMUM AND 0.718 INCHES MAXIMUM |