| CMLP |
THREAD QUANTITY PER INCH |
24 |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.062 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
0.750 INCHES NOMINAL |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.623 INCHES MINIMUM FIRST HOLE AND 0.625 INCHES MAXIMUM FIRST HOLE |
| AAJD |
THREAD CLASS |
3A |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASA |
THREAD LENGTH |
0.688 INCHES MINIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQFM |
HARDNESS RATING |
34.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.170 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.082 INCHES NOMINAL FIRST HOLE |
| AASL |
HEAD DIAMETER |
0.750 INCHES NOMINAL |