| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1163 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| MATT |
MATERIAL |
PLASTIC LOCKING FEATURE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE FASTENER OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
0.448 INCHES MINIMUM AND 0.478 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM FASTENER AND CHROMATE FASTENER |
| AAUM |
LOCKING FEATURE |
PATCH THREADS OR PELLET THREADS OR STRIP THREADS |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASA |
THREAD LENGTH |
0.313 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| MATT |
MATERIAL |
STEEL COMP E4340 FASTENER OR STEEL COMP 4140 FASTENER OR STEEL COMP 8740 FASTENER |
| AASL |
HEAD DIAMETER |
0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| CMLP |
THREAD QUANTITY PER INCH |
32 |