| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A582 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| AAWL |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER |
2.677 INCHES MINIMUM AND 2.683 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.147 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.137 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |
| AAWK |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER |
2.635 INCHES MINIMUM AND 2.648 INCHES MAXIMUM |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| AASA |
THREAD LENGTH |
0.287 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
4 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASB |
FASTENER LENGTH |
3.076 INCHES MINIMUM AND 3.116 INCHES MAXIMUM |
| AAWF |
FOURTH DIAMETER FROM HEAD |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| AASU |
HEAD HEIGHT |
0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL OR STEEL COMP 304 OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |