| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| ANEE |
GRIP LENGTH |
0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.306 INCHES MINIMUM FIRST HOLE AND 1.356 INCHES MAXIMUM FIRST HOLE |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASL |
HEAD DIAMETER |
0.515 INCHES MINIMUM AND 0.566 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.569 INCHES MINIMUM AND 0.619 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R54520 OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| AASB |
FASTENER LENGTH |
1.517 INCHES MINIMUM AND 1.547 INCHES MAXIMUM |