| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL COMP 6150 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| AAJD |
THREAD CLASS |
3A |
| ANEE |
GRIP LENGTH |
2.802 INCHES MINIMUM AND 2.822 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASB |
FASTENER LENGTH |
3.312 INCHES MINIMUM AND 3.344 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.4982 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASL |
HEAD DIAMETER |
0.929 INCHES MINIMUM AND 1.024 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AASA |
THREAD LENGTH |
0.490 INCHES MINIMUM AND 0.542 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81205-BACB30AB MANUFACTURERS STANDARD |