| ASDB |
WIDTH ACROSS FLATS |
0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
OXIDE OVERALL |
| CWDK |
POINT CHAMFER ANGLE |
270.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 302 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 309S OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 385 OVERALL |
| ABQJ |
POINT STYLE |
FLAT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| AASU |
HEAD HEIGHT |
0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| AAUY |
POINT LENGTH |
0.100 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAVA |
POINT DIAMETER |
0.116 INCHES MINIMUM AND 0.121 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
COLOR BLACK. TWO KEY WAYS ON THREADS 0.040 MIN DIA 0.050 MAX DIA |
| CMLP |
THREAD QUANTITY PER INCH |
32 |