| AASL |
HEAD DIAMETER |
0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.312 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
FED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.059 INCHES NOMINAL |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.245 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| AHYM |
NOMINAL THREAD DIAMETER |
0.112 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| CRSQ |
COUNTERSINK ANGLE |
80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.112 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASA |
THREAD LENGTH |
0.186 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 316 OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
40 |