| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTMA308 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AAUM |
LOCKING FEATURE |
PATCH THREADS |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL COMP 309S OVERALL OR STEEL COMP 303 PLUS X OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP 385 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 303CU OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 303MA OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| AASA |
THREAD LENGTH |
0.120 INCHES MINIMUM AND 0.201 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.112 INCHES |
| AASL |
HEAD DIAMETER |
0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
40 |