| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| AASA |
THREAD LENGTH |
0.901 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.313 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.432 INCHES MINIMUM FIRST HOLE AND 2.448 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CQBC |
MINIMUM TENSILE STRENGTH |
63000 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUR |
GRIP DIAMETER |
0.6236 INCHES MINIMUM AND 0.6241 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
CROWNED HEXAGON |
| ANEE |
GRIP LENGTH |
1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP XM-13 OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
2.667 INCHES MINIMUM AND 2.687 INCHES MAXIMUM |
| AAUM |
LOCKING FEATURE |
DETENT BALL GRIP |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |