| MATT |
MATERIAL |
STEEL COMP 316L OVERALL OR STEEL COMP 309S OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 385 OVERALL OR STEEL COMP 303 PLUS X OVERALL OR STEEL COMP 303CU OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 303MA OVERALL |
| AASA |
THREAD LENGTH |
0.347 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ENAMEL LUSTERLESS HEAD |
| AAUM |
LOCKING FEATURE |
PATCH THREADS |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
HEAD COLOR GRAY 36231FED-STD-595 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AASL |
HEAD DIAMETER |
0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| SFTT |
SURFACE TREATMENT |
PASSIVATE FASTENER |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |