| MATT |
MATERIAL |
STEEL COMP 384 OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 309S OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 385 OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
36 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.086 INCHES |
| AASA |
THREAD LENGTH |
0.070 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| AAUM |
LOCKING FEATURE |
PATCH THREADS OR PELLET THREADS |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AASB |
FASTENER LENGTH |
0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| CRSQ |
COUNTERSINK ANGLE |
80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASL |
HEAD DIAMETER |
0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |