| MATT |
MATERIAL |
PLASTIC LOCKING FEATURE |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| THSD |
THREAD SERIES DESIGNATOR |
UNRF |
| MATT |
MATERIAL |
STEEL COMP 305 FASTENER OR STEEL COMP 316 FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 302 FASTENER OR STEEL COMP 384 FASTENER |
| CQFM |
HARDNESS RATING |
80.0 ROCKWELL B MINIMUM FASTENER |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| AASU |
HEAD HEIGHT |
0.449 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASB |
FASTENER LENGTH |
1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
1.090 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| SFTT |
SURFACE TREATMENT |
PASSIVATE FASTENER |
| CSYT |
CHAMFER ANGLE |
30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| AAUM |
LOCKING FEATURE |
STRIP THREADS OR PELLET THREADS OR PATCH THREADS |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| ASDB |
WIDTH ACROSS FLATS |
0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM |