| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AASL |
HEAD DIAMETER |
0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL COMP 384 OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 309S OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 385 OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| AASB |
FASTENER LENGTH |
0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.095 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AASA |
THREAD LENGTH |
0.250 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |