| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| AASK |
HEAD STYLE |
KNURLED NO. 1 |
| AASU |
HEAD HEIGHT |
0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.750 INCHES MINIMUM |
| ABQJ |
POINT STYLE |
CONE |
| AAVA |
POINT DIAMETER |
0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUY |
POINT LENGTH |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASB |
FASTENER LENGTH |
1.125 INCHES NOMINAL |
| CWDK |
POINT CHAMFER ANGLE |
85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-W-52263 MIL SPEC ALL MATERIAL RESPONSES OVERALL OR ASTM A581 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| MATT |
MATERIAL |
STEEL COMP 303CU OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 303 PLUS X OVERALL OR STEEL COMP 203EZ OVERALL OR STEEL COMP 303MA OVERALL OR STEEL COMP 303SE OVERALL |
| AASA |
THREAD LENGTH |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |