| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AASA |
THREAD LENGTH |
0.486 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.578 INCHES MINIMUM AND 0.634 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| CWYB |
SHOULDER SHAPE |
ROUND FIRST SHOULDER |
| AATN |
SHOULDER DIAMETER |
0.327 INCHES MINIMUM FIRST SHOULDER AND 0.328 INCHES MAXIMUM FIRST SHOULDER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AATX |
SHOULDER LENGTH |
0.923 INCHES MINIMUM FIRST SHOULDER AND 0.943 INCHES MAXIMUM FIRST SHOULDER |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AASB |
FASTENER LENGTH |
1.429 INCHES MINIMUM AND 1.449 INCHES MAXIMUM |