| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
0.8 MICROMETERS THREADS |
| ANEE |
GRIP LENGTH |
37.8 MILLIMETERS MINIMUM AND 38.2 MILLIMETERS MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| CQWR |
EXTERNAL THREAD TOLERANCE CLASS |
4H6H |
| AAUR |
GRIP DIAMETER |
5.965 MILLIMETERS MINIMUM AND 5.990 MILLIMETERS MAXIMUM |
| AASL |
HEAD DIAMETER |
10.8 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| THSD |
THREAD SERIES DESIGNATOR |
MJ |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NA0038 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASA |
THREAD LENGTH |
9.5 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM |
| CQQR |
THREAD PITCH IN MILLIMETERS |
1.0 |
| AHYM |
NOMINAL THREAD DIAMETER |
6.0 MILLIMETERS |
| CSYM |
SURFACE FINISH |
0.8 MICROMETERS BEARING SURFACE OF HEAD |
| CQBC |
MINIMUM TENSILE STRENGTH |
660 MEGAPASCALS |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| CSYM |
SURFACE FINISH |
0.8 MICROMETERS GRIP |
| CRSQ |
COUNTERSINK ANGLE |
99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
47.7 MILLIMETERS MINIMUM AND 48.3 MILLIMETERS MAXIMUM |