| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| AASA |
THREAD LENGTH |
0.276 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| ABQZ |
INTERNAL DRIVE STYLE |
TORQUE SET |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASL |
HEAD DIAMETER |
0.322 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| CYAU |
SCREW MATERIAL |
STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CYBA |
SCREW SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1623 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASB |
FASTENER LENGTH |
2.636 INCHES MINIMUM AND 2.666 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |