| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.986 INCHES MINIMUM FIRST HOLE AND 2.016 INCHES MAXIMUM FIRST HOLE |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AASA |
THREAD LENGTH |
0.523 INCHES MINIMUM AND 0.559 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.562 INCHES MINIMUM AND 1.578 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM FASTENER AND 41.0 ROCKWELL C MAXIMUM FASTENER |
| AAJD |
THREAD CLASS |
3A |
| AAUR |
GRIP DIAMETER |
0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| SFTT |
SURFACE TREATMENT |
CADMIUM FASTENER AND CHROMATE FASTENER |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL COMP E4340 FASTENER OR STEEL COMP 8740 FASTENER OR STEEL COMP 4140 FASTENER OR STEEL COMP 6150 FASTENER |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CQBC |
MINIMUM TENSILE STRENGTH |
95000 POUNDS PER SQUARE INCH |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| ABQZ |
INTERNAL DRIVE STYLE |
HIGH-TORQUE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AASB |
FASTENER LENGTH |
2.101 INCHES MINIMUM AND 2.121 INCHES MAXIMUM |
| AAUM |
LOCKING FEATURE |
DETENT BALL GRIP |
| AASL |
HEAD DIAMETER |
0.704 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |