| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.329 INCHES NOMINAL FIRST HOLE |
| AASB |
FASTENER LENGTH |
1.438 INCHES MINIMUM AND 1.468 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.832 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASA |
THREAD LENGTH |
0.453 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUR |
GRIP DIAMETER |
0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.438 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1157 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ANEE |
GRIP LENGTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |