| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING FEATURE |
| AAJD |
THREAD CLASS |
3A |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| MATT |
MATERIAL |
STEEL COMP 302 FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 305 FASTENER OR STEEL COMP 303 FASTENER OR STEEL COMP 316 FASTENER |
| SFTT |
SURFACE TREATMENT |
CADMIUM FASTENER AND CHROMATE FASTENER |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASA |
THREAD LENGTH |
0.512 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AAUM |
LOCKING FEATURE |
PELLET LOCKING FEATURE |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| BQDM |
HOLE TYPE |
DRILLED |
| AASL |
HEAD DIAMETER |
0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| ASDB |
WIDTH ACROSS FLATS |
0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
6 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AAUB |
HOLE DIAMETER |
0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
ROUND INTERNAL HEXAGON |
| AASB |
FASTENER LENGTH |
0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |