| AASU |
HEAD HEIGHT |
0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.095 INCHES NOMINAL |
| AASL |
HEAD DIAMETER |
0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.500 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.409 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 309 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 347 OVERALL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072 E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.164 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SCREW IS THREADED THE FULL LENGTH EXCEPT EXTERNALLY RELIEVED PORTION |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.420 INCHES NOMINAL |
| AASK |
HEAD STYLE |
PAN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL OR FED-STD66 FED STD ALL MATERIAL RESPONSES OVERALL |