| SPCL |
SPECIAL TEST FEATURES |
STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RINGS BEFORE INSTALLING |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.435 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
F-22 RAPTOR |
| ABQJ |
POINT STYLE |
CHAMFER DOG |
| CQBC |
MINIMUM TENSILE STRENGTH |
2845 POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOLD-OUT SPRING INSERTED; 2 LEAD THREAD. |
| AAJD |
THREAD CLASS |
3A |
| AAUM |
LOCKING FEATURE |
DETENT RING LOCKING FEATURE |
| AAWU |
SINGLE SHEAR STRENGTH |
4140 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUR |
GRIP DIAMETER |
0.249 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CWDK |
POINT CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AAVA |
POINT DIAMETER |
0.211 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| AASA |
THREAD LENGTH |
0.477 INCHES MINIMUM AND 0.607 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
STUD BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5731 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS5737 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
0.857 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| ANEE |
GRIP LENGTH |
0.150 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AAUY |
POINT LENGTH |
0.100 INCHES NOMINAL |