| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.302 INCHES NOMINAL |
| ABQJ |
POINT STYLE |
CHAMFER DOG |
| AAJD |
THREAD CLASS |
3A |
| FEAT |
SPECIAL FEATURES |
DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOULD-OUT SPRING INSERTED; 2 LEAD THREAD |
| AAUM |
LOCKING FEATURE |
DETENT RING LOCKING FEATURE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.722 INCHES MINIMUM AND 0.771 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MS 5731 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| AAUR |
GRIP DIAMETER |
0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAWU |
SINGLE SHEAR STRENGTH |
6490 POUNDS PER SQUARE INCH |
| CQBC |
MINIMUM TENSILE STRENGTH |
4600 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AGAV |
END ITEM IDENTIFICATION |
F-22 RAPTOR(EMD) |
| ANEE |
GRIP LENGTH |
0.291 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| CWDK |
POINT CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AASL |
HEAD DIAMETER |
0.542 INCHES NOMINAL |
| SUPP |
SUPPLEMENTARY FEATURES |
STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BEFORE INSTALLING |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
STUD BOLT |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAUY |
POINT LENGTH |
0.100 INCHES NOMINAL |
| AAVA |
POINT DIAMETER |
0.267 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |