| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AASL |
HEAD DIAMETER |
1.710 INCHES NOMINAL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
3.367 INCHES MINIMUM FIRST HOLE AND 3.372 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAJD |
THREAD CLASS |
3A |
| AASA |
THREAD LENGTH |
0.610 INCHES MINIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASU |
HEAD HEIGHT |
0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.499 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL OVERALL |
| AASB |
FASTENER LENGTH |
3.564 INCHES MINIMUM AND 3.569 INCHES MAXIMUM |
| AAWX |
CONCENTRIC HOLE DEPTH |
2.654 INCHES MINIMUM AND 2.669 INCHES MAXIMUM |
| AAVH |
SHOULDER DIAMETER |
1.1175 INCHES MINIMUM AND 1.1186 INCHES MAXIMUM |
| AAVK |
SHOULDER LENGTH |
2.954 INCHES MINIMUM AND 2.959 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
46.0 ROCKWELL C MINIMUM OVERALL AND 49.0 ROCKWELL C MAXIMUM OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| AASK |
HEAD STYLE |
ROUND W/WRENCH FLATS |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| STYL |
STYLE DESIGNATOR |
CONCENTRIC HOLE UNTHREADED |
| AATB |
WIDTH BETWEEN FLATS |
1.625 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |