| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
AS MODIFIED BY HOLE TYPE AND QUANTITY |
| AASU |
HEAD HEIGHT |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.125 INCHES NOMINAL |
| AATB |
WIDTH BETWEEN FLATS |
0.741 INCHES MINIMUM AND 0.751 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8630 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| AASA |
THREAD LENGTH |
0.765 INCHES MINIMUM AND 0.844 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ANEE |
GRIP LENGTH |
1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
2.031 INCHES MINIMUM AND 2.078 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| BQDM |
HOLE TYPE |
DRILLED |
| CBBL |
FEATURES PROVIDED |
UNFINISHED HEAD |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
13 |