| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CQHQ |
MINIMUM YIELD STRENGTH |
85000 POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.675 INCHES NOMINAL FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING OVERALL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CBBL |
FEATURES PROVIDED |
FINISHED HEAD |
| AAJD |
THREAD CLASS |
3A |
| CQBC |
MINIMUM TENSILE STRENGTH |
130000 POUNDS PER SQUARE INCH |
| AATB |
WIDTH BETWEEN FLATS |
0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
SPRING LOADED BALL IN SHANK 0.244 IN. FROM HEAD |
| CQFM |
HARDNESS RATING |
248.0 BRINELL STANDARD MINIMUM OVERALL AND 341.0 BRINELL STANDARD MAXIMUM OVERALL |
| ANEE |
GRIP LENGTH |
0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
CROWNED HEXAGON |
| AASA |
THREAD LENGTH |
0.312 INCHES MINIMUM AND 0.337 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR 54-71A,FSCM 73342 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
0.750 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |