| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
TWO HOLES IN SHANK AT 90 DEG. TO EACH OTHER |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.094 INCHES MINIMUM ALL HOLES AND 0.101 INCHES MAXIMUM ALL HOLES |
| AASU |
HEAD HEIGHT |
0.260 INCHES NOMINAL |
| AATB |
WIDTH BETWEEN FLATS |
0.741 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL |
| AASA |
THREAD LENGTH |
0.650 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASB |
FASTENER LENGTH |
1.300 INCHES NOMINAL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
2 |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.160 INCHES NOMINAL ALL HOLES |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.494 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.120 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.434 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |