| CSYM |
SURFACE FINISH |
62.0 MICROINCHES BEARING SURFACE OF HEAD |
| MATT |
MATERIAL |
STEEL COMP 81B45 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4130 OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES NOMINAL FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
3.108 INCHES MINIMUM FIRST HOLE AND 3.140 INCHES MAXIMUM FIRST HOLE |
| AATB |
WIDTH BETWEEN FLATS |
0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ASXK |
HOLE QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
HEXAGON |
| AASU |
HEAD HEIGHT |
0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAUB |
HOLE DIAMETER |
0.046 INCHES NOMINAL |
| BQDM |
HOLE TYPE |
DRILLED |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
3.265 INCHES MINIMUM AND 3.312 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
2.796 INCHES MINIMUM AND 2.828 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AAUR |
GRIP DIAMETER |
0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |