| AASL |
HEAD DIAMETER |
0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| AAVZ |
GROOVE DIAMETER |
0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AASB |
FASTENER LENGTH |
3.672 INCHES NOMINAL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
3.453 INCHES MINIMUM FIRST HOLE AND 3.485 INCHES MAXIMUM FIRST HOLE |
| AASU |
HEAD HEIGHT |
0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW BOLT SHANK DIA |
| AASK |
HEAD STYLE |
BUTTON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4037 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.438 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAWU |
SINGLE SHEAR STRENGTH |
11250 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| AASA |
THREAD LENGTH |
0.360 INCHES MINIMUM |