| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
THREAD T PER M1L-S-7742 EXCEPT MAJOR D1A IS NOT TO EXCEED MAX ALLOW BOLT SHANK D1A |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAWU |
SINGLE SHEAR STRENGTH |
2125 POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
BUTTON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4037 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAVZ |
GROOVE DIAMETER |
0.141 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.297 INCHES MINIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.188 INCHES NOMINAL FIRST HOLE |
| AASB |
FASTENER LENGTH |
1.344 INCHES NOMINAL |