| CBBL |
FEATURES PROVIDED |
FINISHED HEAD |
| ANEE |
GRIP LENGTH |
4.547 INCHES MINIMUM AND 4.578 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| AATB |
WIDTH BETWEEN FLATS |
0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| MATT |
MATERIAL |
ALUMINUM ALLOY OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQBC |
MINIMUM TENSILE STRENGTH |
62000 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASB |
FASTENER LENGTH |
5.016 INCHES MINIMUM AND 5.062 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| AASU |
HEAD HEIGHT |
0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-200 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OVERALL AND MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| AASA |
THREAD LENGTH |
0.438 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
4.859 INCHES MINIMUM FIRST HOLE AND 4.891 INCHES MAXIMUM FIRST HOLE |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM OVERALL AND ANODIZE OVERALL |