| AASL |
HEAD DIAMETER |
0.812 INCHES NOMINAL |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-B-6812 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.719 INCHES NOMINAL FIRST HOLE |
| AASU |
HEAD HEIGHT |
0.219 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
0.922 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4037 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 4140 OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAVZ |
GROOVE DIAMETER |
0.360 INCHES NOMINAL |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW SHANK BOLT DIA |
| AASK |
HEAD STYLE |
BUTTON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES NOMINAL FIRST HOLE |
| AASA |
THREAD LENGTH |
0.422 INCHES MINIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.438 INCHES |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAWU |
SINGLE SHEAR STRENGTH |
11250 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |