| CMLP |
THREAD QUANTITY PER INCH |
24 |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL OVERALL |
| CRHT |
DISTANCE FROM CENTER OF EYE TO SHANK END |
0.952 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.593 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| AATK |
EYE INSIDE DIAMETER |
0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAUA |
EYE STOCK THICKNESS |
0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AATR |
SHANK LENGTH |
0.703 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AATP |
SHOULDER THICKNESS |
0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAVH |
SHOULDER DIAMETER |
0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| CWXM |
EYE OUTSIDE WIDTH |
0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ROUND, CLOSED W/SHOULDER |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR SAE ASSN STD 6TH MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 7TH MATERIAL RESPONSE OVERALL |
| FEAT |
SPECIAL FEATURES |
EYE COUNTERSINK 0.030 IN. BY 45 DEG BOTH SIDES |
| AASA |
THREAD LENGTH |
0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |