| AASB |
FASTENER LENGTH |
1.953 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
FINISHED HEAD |
| AAJD |
THREAD CLASS |
3A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASU |
HEAD HEIGHT |
0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.750 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
62000 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.781 INCHES MINIMUM FIRST HOLE AND 1.828 INCHES MAXIMUM FIRST HOLE |
| AASK |
HEAD STYLE |
HEXAGON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-200 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| ANEE |
GRIP LENGTH |
1.172 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OVERALL AND MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AATB |
WIDTH BETWEEN FLATS |
0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM OVERALL AND ANODIZE OVERALL |