| AAUR |
GRIP DIAMETER |
0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.266 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
2.871 INCHES MINIMUM AND 2.901 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.486 INCHES MINIMUM AND 0.536 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| AHYM |
NOMINAL THREAD DIAMETER |
0.562 INCHES |
| AATB |
WIDTH BETWEEN FLATS |
0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| ANEE |
GRIP LENGTH |
2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.737 INCHES MINIMUM FIRST HOLE AND 2.787 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |