| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AAUA |
EYE STOCK THICKNESS |
0.188 INCHES NOMINAL |
| CWXM |
EYE OUTSIDE WIDTH |
0.750 INCHES NOMINAL |
| AATP |
SHOULDER THICKNESS |
0.094 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.640 INCHES MINIMUM |
| AAJD |
THREAD CLASS |
3A |
| CRHT |
DISTANCE FROM CENTER OF EYE TO SHANK END |
1.321 INCHES NOMINAL |
| AATR |
SHANK LENGTH |
0.812 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
| AATK |
EYE INSIDE DIAMETER |
0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ABHP |
OVERALL LENGTH |
1.844 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL=S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| AAVH |
SHOULDER DIAMETER |
0.750 INCHES NOMINAL |
| CTWF |
DISTANCE FROM THREADED END TO SHANK HOLE CENTER |
0.626 INCHES NOMINAL FIRST HOLE |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES NOMINAL FIRST HOLE |
| STYL |
STYLE DESIGNATOR |
ROUND, CLOSED W/SHOULDER |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL COMP 8630 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL |