| ANEE |
GRIP LENGTH |
3.812 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.641 INCHES MINIMUM |
| CBBL |
FEATURES PROVIDED |
FINISHED HEAD |
| AAJD |
THREAD CLASS |
3A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.875 INCHES |
| AATB |
WIDTH BETWEEN FLATS |
1.000 INCHES NOMINAL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL |
| AASL |
HEAD DIAMETER |
1.500 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
14 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
4.235 INCHES MINIMUM FIRST HOLE AND 4.265 INCHES MAXIMUM FIRST HOLE |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.170 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| AASK |
HEAD STYLE |
ROUND W/WRENCH FLATS CHAMFERED |
| AASB |
FASTENER LENGTH |
4.453 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |